
Technical Summary & Field Standards
Square feet measure area, linear feet measure length and board feet measure lumber volume. How to convert between them, with charts for boards and lumber.
Square feet measure a surface (length × width). Linear feet measure length only, like a run of baseboard or a board laid end to end. Board feet measure the volume of lumber: thickness (in) × width (in) × length (ft) ÷ 12. You can only convert between them when you know the missing dimension, such as the width of the boards.
| Unit | Measures | Used for | Example |
|---|---|---|---|
| Square feet (sq ft) | Area | Flooring, tile, paint, drywall, roofing | A 12 × 14 ft room is 168 sq ft |
| Linear feet (lin ft, LF) | Length | Trim, baseboard, fencing, lumber sold by length, countertops | Baseboard around that room is about 49 LF |
| Board feet (BF) | Volume of wood | Hardwood lumber, lumber pricing | One 2×6 that is 8 ft long is 8 BF |
Square feet
Area of a flat surface. For a rectangle it’s length × width, both in feet. A room that isn’t a rectangle can be split into rectangles and added up; see our guide to measuring an L-shaped room, or use the square footage calculator, which also converts to square yards, square meters and acres.
Linear feet
Just length, ignoring width. Baseboard, crown molding, gutters, fence and countertop edges are sold or priced this way. For trim, the linear footage of a room is its perimeter minus the doorways. A 12 × 14 ft room has a perimeter of 52 ft; take off a 3 ft door and you need about 49 linear feet of baseboard, plus a little extra for miter cuts.
From square feet to linear feet of boards
To cover an area with boards (decking, shiplap, flooring sold by the piece), divide by the width each board covers, in feet:
Linear feet = square feet ÷ (board width in inches ÷ 12)
| Nominal board | Actual width | Linear ft to cover 100 sq ft |
|---|---|---|
| "4 in" (1×4, 2×4) | 3.5 in | 342.9 |
| "6 in" (1×6, 2×6, decking) | 5.5 in | 218.2 |
| "8 in" (1×8, 2×8) | 7.25 in | 165.5 |
| "10 in" (1×10, 2×10) | 9.25 in | 129.7 |
| "12 in" (1×12, 2×12) | 11.25 in | 106.7 |
Add your gap to the board width if there is one, and a waste allowance on top. The deck calculator handles both.
Board feet
A board foot is a piece of wood 12 in × 12 in × 1 in: 144 cubic inches. Hardwood lumberyards price by the board foot, and some framing lumber is quoted that way too. The formula uses nominal sizes:
Board feet = thickness (in) × width (in) × length (ft) ÷ 12
| Lumber | Board feet |
|---|---|
| 2×4, 8 ft | 5.33 |
| 2×4, 10 ft | 6.67 |
| 2×6, 8 ft | 8 |
| 2×6, 12 ft | 12 |
| 2×8, 10 ft | 13.33 |
| 2×10, 12 ft | 20 |
| 2×12, 16 ft | 32 |
| 4×4, 8 ft | 10.67 |
| 1×6, 8 ft | 4 |
So a 2×6 that is 12 ft long is 2 × 6 × 12 ÷ 12 = 12 board feet. If a yard quotes $1.10 per board foot, that board costs $13.20.
Quick conversions
- Square feet to square yards: divide by 9 (carpet is often sold by the square yard).
- Square inches to square feet: divide by 144.
- Cubic feet to cubic yards: divide by 27 (concrete, gravel, mulch).
- Linear feet to board feet: multiply by thickness × width ÷ 12. For a 2×4, each linear foot is 0.667 board feet.
Which one do you need?
Look at how the material is sold. Flooring and tile come in boxes labeled in square feet. Trim comes in pieces of a set length, so you need linear feet and then round up to whole pieces. Hardwood for a project comes by the board foot, and you should add 20 to 30% for defects and cutting when buying rough stock.